Quality and extremely cost effective 4 LED Safety flare with 2 flashing patterns and visibility from over a mile. Safe, water resistant and made of rugged high impact plastic. Uses 2 AAA batteries. Battery life is 250+ hours in flash mode.
Product Details
LED Safety Flares are a safe, eco-friendly, highly visible, rugged, water resistant and cost effective alternative to conventional incendiary road safety flares. This extremely cost effective 4 LED flare is made of high impact plastic that is strong enough to be run over by a fire truck. It features 2 different flash patterns that are visible from distances that exceed one mile.
What is an LED Safety Flare?
It is a flameless, non-toxic, battery-powered flare in a plastic crushproof enclosure that is illuminated by multiple ultra-bright LED lights instead of a flame.
Non-Toxic LED Flares Are Eco-Friendly
Traditional incendiary flares are neither safe nor eco-friendly. Not only do they produce a hazardous, visible smoke, they also contain a highly toxic chemical contaminant called
perchlorate. A study conducted by the Rhode Island Department of Health found that, “240,000 gallons of water could be contaminated by discarding a single flare in the water source”. LED flares will not contaminate ground water and do not produce smoke or ash.
You Will Save Thousands With The Reusable LED Flare!!
Since LED Flares are reusable, you will save money when you
switch to them if you are using incendiary road flares. In the tables below look up the # of incendiary flares that you
use per incident and the number of incidents you typically have per
year to determine what your cost savings will be.
Print These Cost Savings.
Incendiary Flares - Cost
| # of flares / # of 3 hour incidents | 50 | 100 | 200 | 300 |
| 1 | $540 | $1,080 | $2,160 | $3,240 |
| 3 | $1,620 | $3,240 | $6,480 | $9,720 |
| 6 | $3,240 | $6,480 | $12,960 | $19,440 |
| 9 | $4,860 | $9,720 | $19,440 | $29,160 |
| 12 | $6,480 | $12,960 | $25,920 | $38,880 |
Economy LED Flare Cost Savings
| # of flares / # of 3 hour incidents | 50 | 100 | 200 | 300 |
| 1 | $516 | $1,052 | $2,124 | $3,196 |
| 3 | $1548 | $3,156 | $6,372 | $9,588 |
| 6 | $3,086 | $6,302 | $12,734 | $19,166 |
| 9 | $4,634 | $9,458 | $19,106 | $28,754 |
| 12 | $6,172 | $12,604 | $25,468 | $38,332 |
Key Features
LED Flares Are Better Than Traditional Incendiary Flares
- Highly Visible - 4 super bright LEDs that can be seen from 1 mile
- Cost Effective - You'll save money when you use LED Flares instead of incendiary flares
- Extremely durable - high impact plastic that is crush proof and corrosion proof
- Reusable - Powered by 2 replaceable AAA Alkaline batteries
- Eco-Friendly - will not contaminate ground water and does not produce smoke or ash.
- Safe - will not ignite fuel or cause a fire if tipped over
- Flameless - will not cause burns when handled or scorch pavement
- Water resistant for use in inclement weather
- 2 flashing patterns - solid or flashing mode
- Compact design that allows for easy storage
- Can be used in any vehicle
- Battery life in flash mode is 250+ Hours
- NFPA, DOT (FMCSA) and MUTCD compliant
Applications
LED Safety Flares Have Many Uses. Use them in cars, trucks, boats, RVs, semi-trucks, construction zones and emergency response vehicles.
- Identifying road hazards or closures
- Vehicle breakdowns
- Traffic control on fire and emergency scenes
- Cordoning off police scenes and DUI checkpoints
- Evacuation routes
- Fuel spill warning
- Signal for help
- Power failures or blackouts
- Helicopter landing zones
Specifications
| Water Resistant | Yes |
| Waterproof | No |
| Crush Proof | Yes. Can withstand the impact of roadside traffic. Can even be run over by a fire truck and still operate. |
| Battery | Uses 2 replaceable AAA batteries |
| Battery Shelf Life | 2 years |
| Number of LED Bulbs | 4 |
| Visibility | 1 mile |
| Number of Flash Patterns | 2 |
| Magnetic Mount | No |
| Usable With Traffic Cone | Yes |
| Temperature Range | AAA Battery Manufacturer Dependent |
| LED Flare Weight | 5 oz |
| LED Flare Dimensions | 4.5" diameter x 0.9" H |
| Limited Warranty | 1 Year |
| DOT & Traffic Safety Compliance: | 1. U.S. DOT (FMCSA) 49 CFR § 392.25 &
393.95 (g) (prohibits the carrying of any flame-producing flare on any Commercial Motor Vehicle (CMV) transporting explosives; any cargo of flammable liquid or flammable compressed gas, whether loaded or empty; or any CMV using compressed gas as a motor fuel). 2. MUTCD Type A (flashing) and Type C (solid on) 3. NFPA 1901 Standards for Traffic |
Flashing Patterns
Battery life is dependent upon which flashing pattern is used. With new batteries you may expect these run times:
| Flash Pattern | Run Time |
|
#1 - Flashing Mode |
250+ hours |
|
#2 - Steady On |
75+ hours |
What's Included
Single Pack Includes:
- 1 LED Flare
* Requires 2 AAA Batteries - Not Included
6 Pack Kit Includes:
- 6 LED Flares
- Black Commercial Grade Plastic Storage Case
LED Safety Flare
Economy
Red LED/Yellow Shell
1 LED Flare
Price: $19.95
6 LED Flare Kit with Black Commercial Grade Case
Price: $129.95
Contact Us for Quantity Discount Pricing
